Apc Network Management Card AP9617 Manual do Utilizador

®Network Management CardAP9617AP9618AP9619Installation and Quick-Start Manual

Quick ConfigurationOverviewYou must configure the following TCP/IP settings before the Management Card can operate on a network:•The IP address of the

Quick ConfigurationAPC Management Card WizardYou can use the APC Management Card Wizard at a Windows 95, Windows 98, Windows NT 4.0, or Windows 2000 c

Quick ConfigurationBOOTP. You can use an RFC951-compliant BOOTP server to configure the TCP/IP settings the Management Card needs.1. Enter the Managem

Quick ConfigurationDHCP. You can use a RFC2131/RFC2132-compliant DHCP server to configure the TCP/IP settings the Management Card needs.1. A Managemen

Quick ConfigurationLocal access to the control consoleYou can use a local computer, a computer that connects to the Management Card through the serial

Quick ConfigurationRemote access to the control consoleFrom any computer on the same subnet as the Management Card, you can use ARP and Ping in a proc

Quick ConfigurationControl consoleAfter you log on at the control console, as described in either “Local access to the control console” on page 14 or

How to Access a Configured Network Management CardOverview Once the Management Card is running on your network, you can use several different interfac

How to Access a Configured Network Management CardFTPYou can use FTP (enabled by default) to download new firmware to a Management Card, or to access

Radio Frequency InterferenceThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of th

How to Avoid Equipment DamageDisconnect UPS powerYou do not need to turn off a Symmetra® or a Silcon™ model UPS to install the Management Card.Smart-U

How to Recover from a Lost PasswordYou can use a local computer, a computer that connects to the Management Card through the serial port at the Manage

Preliminary InformationNew standard featuresThe AP9617, AP9618, and AP9619 Management Cards include the following new features:• Generates system log

Preliminary InformationAP9618U and AP9619U upgrade kitsYou can use an AP9618U kit to convert an AP9617 Network Management Card EX or an AP9619 Network

Installation in a UPSOverviewYou can install the Management Card in a card slot in a Smart-UPS, Matrix-UPS, or Symmetra. For a Silcon UPS, the Managem

Installation in a UPSStep 2: Install the Network Management CardIf you are installing the Management Card in a Symmetra UPS that uses more than one AP

Expansion/Triple Chassis InstallationOverviewUse an Expansion Chassis or a Triple Expansion Chassis if the UPS has no card slot available.The Manageme

Expansion/Triple Chassis InstallationStep 2: Install the Network Management CardIf the UPS uses more than one APC management product, see Installation