APC MGE Galaxy 3500 Extended Run Frame Especificações descarregar pdf (Página 13)

9MGE™ Galaxy™ 3500 10-40 kVA 380/400/415 V, 10-30 kVA 208/220 V Battery Installation

Note: The U-shaped interconnection brackets are 1-2 mm higher than the opening below the

enclosure to inactivate the casters. Therefore, the enclosure must be tilted when placing the U-

shaped interconnection brackets under the enclosure.

3. In each side of the same enclosure insert a

maximum of nine and a minimum of two M8

screws (not provided) through holes in the

bottom of the enclosure and through holes in the

U-shaped floor anchoring brackets, and into the

pre-drilled floor holes.

Note: See “Prepare for Floor-Anchoring

(optional)” on page 2 if the floor has not been prepared for anchoring.

4. Fasten the screws.

5. Move the adjacent enclosure on its

casters close to the enclosure with the U-

shaped floor anchoring brackets.

Note: If the additional enclosure is on

its levelling feet, use a forklift or pallet jack to move it into position.









1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Sem comentários

APC MGE Galaxy 3500 Extended Run Frame Especificações Página 13