APC AP9613 Manual de Instalação descarregar pdf (Página 25)

Installation Manual

How to Install Multiple Management Cards

Overview

When installing more than one management card, such as the Network Management

Card (NMC), the Out-of-Band Management Card, etc., you must install the cards in

the order described in this document. This is because they share a serial link with the

UPS. Installing the cards in any other order might result in operational failure.

Before you start

The following table identifies the priority of the cards you will be installing.

Management cards that have more control over the UPS have higher priority.

• Level 6: Exerts total control

• Level 5: Exerts wide, but not total, control

• Level 4: Exerts limited control

• Level 3: Passes commands to the UPS

• Level 2: Exerts no control

• Level 1: Exerts no control and must be installed closest to the UPS

Two models of expansion chassis

If you need management card slots in addition to those in your UPS, use one or

more expansion chassis available.

Management Card Priority

Network Management Card

(AP9630, AP9631) Level 6

Out-of-Band Management Card (AP9608) Level 5

Relay I/O Module (AP9613, AP9610) Level 4

Interface Expander Card (AP9607) Level 3

Building Management Integration Card

(AP9622) Level 2

Environmental Monitoring Card Level 1

1. Attach no more than two Network Management Cards to a UPS.

2. Attach only one Building Management Integration Card to a

UPS.

Chassis Compatible UPS Devices

Expansion Chassis (AP9600), one slot

UPS devices that are not

installed in a rack or enclosure.

DMP IM 990-3404.book Page 21 Monday, March 11, 2013 9:05 AM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Sem comentários

APC AP9613 Manual de Instalação Página 25