APC Network Management Card AP9619 Manual do Utilizador descarregar pdf (Página 22)

UPS Overview – Restart Procedure

18 Smart-UPS® VT ISX 20-30 kVA, 208/220/480V Operation 990-2819

Voltage confirmation

At the restart, the display will prompt you through the following screens:

• When the Confirm Voltage prompt appears on the screen, select desired voltage and press

ENTER.

• When the prompt Apply load appears, select Yes if you want the UPS to provide a load output

now. (If you do not want a UPS load output at this point, select No).

LOAD ON LED is now lit, and the display will show the Confirm Menu Screen.

• Reinstall cable landing cover plates.

• For any optional equipment, refer to product-specific manuals.

See display introduction under The Display.

Note

The UPS is now ready to support the load.

Note

Auto-detection on frequency – if problem occurs call APC Customer Support.

Confirm Voltage

Use 208V

Yes, use 208V

No, select another

Apply load?

Yes

Chrg xxx% ||||||||||

Load xxx% ||||||||||

xxx Vin xxxVout xxHz

Runtime: xxhr xxmin

Status screen

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Sem comentários

APC Network Management Card AP9619 Manual do Utilizador Página 22