APC NetBotz 200 Guia do Utilizador descarregar pdf (Página 108)

USER’S GUIDE

NetBotz Rack Monitor 200

102

Firmware upgrade tool

1. Download the latest firmware release for your NetBotz Rack Monitor 200

(NBRK0200) from www.apc.com/tools/download.

2. Make a note of the IP address of the Main Module. To view the IP address, from

the Administration tab, click Network, then TCP/IP.

3. Create a directory to which you will extract the files.

4. Double-click the file you downloaded from the APC Web site and follow the

prompts to extract the files to the folder created in the previous step and then to

upgrade your Main Module. The upgrade tool starts automatically.

FTP

1. Download the latest firmware release for your NetBotz Rack Monitor 200

(NBRK0200) from www.apc.com/tools/download.

2. From the NetBotz Rack Monitor 200 software interface, check the FTP Server

settings:

• From the Administration tab, click Network, then FTP Server to verify that the

Access option is enabled.

• Note whether the Port setting has changed from the default value of 21.

3. Create a directory to which you will extract the files.

4. Double-click the file you downloaded from the APC Web site and follow the

prompts to extract the files to the folder created in the previous step. You will

download to the Main Module two files extracted: the APC Operating System

(AOS) file and the NetBotz application file. When a window opens and prompts

you for the IP Address, close the window.

5. Open a command prompt window of a computer on the network. Go to the

directory that contains the extracted files, and list the files:

C:\>cd\apc

C:\apc>dir

6. Open an FTP client session: C:\apc>ftp

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 124 125

Sem comentários

APC NetBotz 200 Guia do Utilizador Página 108