APC AP9617 Manual do Utilizador descarregar pdf (Página 12)

USER’S GUIDE

network management card

To connect Type 2 equipment:

1. Select a serial port at the local computer, and disable any service that

uses that port.

2. Use the smart-signaling (advanced signaling) cable (940-0024 or

940-1524) to connect the selected port to the serial port on the

mounting bracket of the Management Card.

To continue the procedure for either type of equipment:

3. Run a terminal program (such as HyperTerminal

), and configure the

selected port for 2400 bps, 8 data bits, no parity, 1 stop bit, and no flow

control, and save the changes.

4. Press

ENTER to display the User Name prompt.

5. Enter your user name and, at the Password prompt, your password.

Do not attach the cable to the serial port on the front panel of

the DC System Controller

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Sem comentários

APC AP9617 Manual do Utilizador Página 12