APC Network Management Card AP9617 Guia do Utilizador descarregar pdf (Página 56)

®®

USER’S GUIDE

network management card

SNMP

An Access option (Settings in the control console) enables (by default) or

disables SNMP. When SNMP is enabled, the Access Control settings

allow you to control how each of the four available SNMP channels is used.

To define up to four NMSs that will serve as trap receivers, see

Trap Receivers; to use SNMP to manage a UPS or an

environmental monitor, see the PowerNet

SNMP Management

Information Base (MIB) Reference Guide (.\doc\mi/jointfilesconvert/430210/bguide.pdf)

on the APC Network Management Card utility CD.

Setting Definition

Community

Name

This setting defines the password (maximum of 15 characters) which an

NMS that is defined by the NMS IP setting uses to access the channel.

NMS IP Limits access to the NMSs specified by the format used for the IP address.

• 159.215.12.1 allows only the NMS with that IP address to have access.

• 159.215.12.255 allows access for any NMS on the 159.215.12 segment.

• 159.215.255.255 allows access for any NMS on the 159.215 segment.

• 159.255.255.255 allows access for any NMS on the 159 segment.

• 0.0.0.0 or 255.255.255.255 allows access for any NMS.

Access

Type

Selects how the NMS defined by the NMS IP setting can use the channel,

when that NMS uses the correct Community Name.

Read The NMS can use GETs at any time, but it can never use SETs.

Write The NMS can use GETs at any time, and can use SETs when

no one is logged into either the control console or Web

interface.

Disabled The NMS cannot use GETs or SETs.

Write+ The NMS can use GETs and SETs at any time, even when

someone is logged into the control console or Web interface.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 189 190

Sem comentários

APC Network Management Card AP9617 Guia do Utilizador Página 56