APC RAID Subsystem SCSI-SATA II Especificações Página 85

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 100
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 84
Appendix A Specifications
A.6. RAID Management
Specification
Configuration
LCD keypad panel
Text-based firmware-embedded utility over RS-232C
connection through the included audio jack-to-DB-9 serial cable
RAIDWatch Manager using an Ethernet link
Telnet access through an Ethernet link
Performance Monitoring Yes
Remote Control and
Monitoring
Yes
Event Notification Yes (via RAIDWatch’s sub modules, Configuration Client and NPC)
Management Connection In-band over SCSI, or out-of-band over Ethernet or RS-232C
Configuration data stored on disks for logical drive assemblies to
Configuration on Disk
exist after controller replacement or hardware failure; basic settings,
e.g., channel model settings, are stored on NVRAM
Failure Indicator
Via audible alarm, LCD keypad panel, RAIDWatch Manager
session, event notifications, or event prompts on terminal emulation
A.7. Fault Tolerance Management
Specification
SATA Drive S.M.A.R.T Support Yes
Battery Back-up Option Yes
ISEMS (RAID Simple
Enclosure Management Service)
via I
2
C Interface
Automatic Drive Failure
Yes
Detection
Yes
Automatic Rebuild on Spare
Drives
Yes
Regenerate Logical Drive Parity Yes
Bad Block Reassignment Yes
Automatic Rebuild upon Failed
Drive Replacement
Yes
Manual Clone of Suspected
Failed Drive
Yes
Concurrent Rebuild on Multiple
Drives in a RAID (0 + 1) Logical
Drive
Salvage the 2
nd
Temporary Failed
Drive in a RAID 1, 3 or 5 Logical
Drive
Salvage the 1
st
Temporary Failed
Yes
Yes
Drive in a RAID 0 Logical Drive
Yes
RAID Management A-5
Vista de página 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 99 100

Comentários a estes Manuais

Sem comentários