APC RAID Subsystem SCSI-SATA II Especificações descarregar pdf (Página 39)

Falcon II SCSI-SATA Installation and Hardware Reference Manual

5. Lock the flap into place by turning the key-lock until the groove on its

face is pointing down (vertical orientation). (See Figure 2-14)

Figure 2-14: Drive Tray Key-lock Rotation

6. Once the drive tray is inserted, the RAID controller will recognize the

drive and scan it in automatically.

2.10 Rack/Cabinet Installation

PN: IFT-9273CSlider36

PN: IFT-9273CSlider32

The FALCON II subsystem has been designed to fit into a standard cabinet or

rack. Two (2) slide rails are available for installing the subsystem into a

rack or cabinet. Please contact your system vendor for further details. The

subsystem should be installed in the rack or cabinet before the hard drives

and the drive trays are installed. If the drive trays with the associated hard

drives are installed, the subsystem will be too heavy to mount into a rack or

cabinet. When installing the subsystem into a rack or cabinet it is advisable

that three people assist in the mounting process.

To install the subsystem into a rack or cabinet please refer to the installation

instructions that came with the slide rails.

2-14

Rack/Cabinet Installation

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 93 94

Sem comentários

APC RAID Subsystem SCSI-SATA II Especificações Página 39