APC RAID Subsystem SCSI-SATA II Especificações descarregar pdf (Página 71)

Falcon II SCSI-SATA Installation and Hardware Reference Manual

failed drive from the subsystem. Do not leave the drive tray slot open

for an extended period of time or the normalized airflow will be

disrupted and subsystem components will overheat and may become

permanently damaged.

5.7.2 Replacing a Hard Drive

When a hard drives fails, it needs to be replaced. To replace a hard drive,

please follow these steps:

WARNING!

The hard drive is fragilealways handle with extreme care. Do not drop

the hard drive; always be slow, gentle, and careful when setting down a

hard drive. Only handle the hard drive by the edges, and avoid touching

any components or connectors.

1. Identify the drive tray that contains the hard drive that needs to be

replaced.

2. Open the key-lock. To remove the drive tray from the enclosure, the

key-lock must be unlocked. (See Figure 5-20) To do this, turn the key-

lock on the front of the drive tray until the groove on its face is in a

horizontal orientation.

Figure 5-20: Drive Tray Key-lock Rotation

3. Open the front flap by pushing the button at the front of the drive tray.

(See Figure 5-21) The drive tray front flap will automatically be lifted

and the drive tray will be dislodged from the chassis.

5-14

Replacing a Failed Hard Drive

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

Sem comentários

APC RAID Subsystem SCSI-SATA II Especificações Página 71