APC IP DSLAM Guia do Utilizador descarregar pdf (Página 203)

195

interface.

Acl Global Deny Apply

This specifies whether the global acl macentry

deny list represented by MO AclGlobalMacList

is to be applied to this port or not. The default

value of this parameter shall depend on the

port type. For Net side ports, the default value

shall be disable and for the cpe side ports the

default value shall be enable. This field is

unused if the bridge port is created over an

PPPOE/IPOE interface or PPPOE/IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

interface.

Acl Global Track Apply

This specifies whether the global acl macentry

track list represented by MO AclGlobalMacList

is to be applied to this port or not. The default

value of this parameter shall depend on the

port type. For Net side ports, the default value

shall be disable and for the cpe side ports the

default value shall be enable. This field is

unused if the bridge port is created over an

PPPOE/IPOE interface or PPPOE/ IPOE is

sensed. Any value of this field shall be ignored

for a bridge port created over a PPPOE/IPOE

interface.

ProxyArpStatus

The Proxy Arp Status on this bridge port. The

value enable of this field indicates that Proxy

Arp request can be received through this port.

This field can be enabled only on bridge port

created over ethernet or aggregator interface.

Before enabling this field user should create a

filter rule with rule action as Copy to Control

and rule description as IPOE_CONTROL and

map it to all those interfaces through which

user wants to receive proxy arp requests.

Sensed IfIndex

This specifies the sensed interface index

corresponding to the bridge port. This field is

used to determine the stack sensed for this

bridge port in the auto sensing scenario. This

field cannot be modified. If the oper status of

the bridge port is 'enable' or 'disable' then the

value of this field gives the interface index on

which the bridge port is currently stacked. If

the oper status is 'dormant' and the value of

this field is other than '-', then it represents the

last interface index on which the bridge port

had been stacked.

ArpTStatus

This specifies whether ARP translation will be

done on the ARP packets received/transmitted

on this port. When enabled, ARP source

MAC address of the incoming ARP packets

(both request/reply) will be changed to virtual

MAC address (if applicable) and the ARP

target MAC address of the outgoing ARP reply

packets will be changed to the original host

MAC address (if applicable).

Directed ARP status

This specifies whether the ARP packets

received on this bridge port are to be directed

to a single port using (VLANId, IP address) to

bridge port mapping learnt using DRA. This

field can be enabled only on the NET side

bridge port. This attribute is effective in

conjunction with the attribute 'gsv

dot1qVlanStaticDirectedARP' of

'Dot1qVlanStatic' MO. ARP packets are to be

directed as mentioned above, only if both the

flags are enabled. If any of the two is

disabled, the ARP packets will be forwarded as

per the normal bridging flow.

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 602 603

Comentários a estes Manuais

Sem comentários