
533
Output
Verbose Mode On
CP Bin Version : 1.6
DP Bin Version : 1.8
Time of Reboot : Thu Jan 2 12:34:56 1970
Reboot Failure Cause : DP Init Failure
Reboot Type : Secondary CFG
Output Fields
FIELD Description
Control Plane Version
The control Plane Version with which the system
could not come up.
Data Plane Version
The data Plane Version with which the system
could not come up.
Time of Reboot
Time at which the reboot failure occured.
Type of Reboot
This tells the type of reboot with which the
system is trying to come up. The various
possible values are :-
Last, Back Up, Default, Minimum, Clean.
Failure Cause
This tells the various causes of failure that
system encountered while rebooting. It can be :-
Sdram CP Decompress failed
Nvram CP Decompress failed
Sdram DP Decompress failed
Nvram DP Decompress failed
DP Init Failure
Nvm CP Nvm DP CI Mismatch
Nvm CP Sdram DP CI Mismatch
Sdram CP Nvm DP CI Mismatch #
Sdram CP Sdram DP CI Mismatch
Sdram CP All DP CI Mismatch
Nvm CP All DP CI Mismatch
Applying Last cfg failed
Applying BackUp cfg failed
Applying Min cfg failed
Applying Nvm FD failed
Applying Sdram FD failed
Nvm CP Last CFG CI Mismatch
Nvm CP Backup CFG CI Mismatch
Sdram CP Last CFG CI Mismatch
Sdram CP Backup CFG CI Mismatch
NVRAM CP had invalid sign
SDRAM CP had invalid sign
Control Plane wrongly linked
CP mem req exceeds limit
Applying Clean cfg Failed
8.25.8 Nbize Commands
8.25.8.1 Get nbsize
Description: Use this command to view System Sizing parameters
available on next boot.
Command Syntax: get nbsize
8.25.8.2 Modify nbsize
Description: Use this command to modify System Sizing parameters
available on next boot.
Command Syntax: modify nbsize [ maxatmport <maxatmport-val> ]
[ maxvcperport <maxvcperport-val> ] [ maxvc <maxvc-val> ]
[ maxatmoam <maxatmoam-val> ] [ maxrmon <maxrmon-val> ]
[ maxnumethprioqs <maxnumethprioqs-val> ] [ maxnumeoaprioqs
<maxnumeoaprioqs-val> ] [ maxmulticast <maxmulticast-val> ]
[ maxmac <maxmac-val> ] [ maxhashbuck <maxhashbuck-val> ]
Comentários a estes Manuais