APC IP DSLAM Guia do Utilizador descarregar pdf (Página 75)

100

101

Application Note

interleaved buffer. RS can also be disabled.

Value:125us | 250us | 500us |1ms | 2ms |

4ms | disable

Preferred Standard Preferred standard compliance. Outcome is

dependent

upon standard support of the remote

unit.GlobespanVirata High Speed ADSL DMT

(ADSL+) applications only

Value: t1413 |gLite | gDmt | alctl14

|multimode | adi | alctl

|t1413Auto|adslPlus|GspanPlus

Maximum Transmit Rate The maximum transmitting rate of ATU-C side

or ATU-R side.

Interleave Delay (ms) The value of Interleave Delay for this channel.

UP Shift SNR (dB/10) Configured Signal/ Noise Margin for rate

upshift. If the noise margin rises above this

level, the modem should attempt to increase

its transmit rate. In the case that RADSL is not

present, the value will be 0.

IntCorrectionDown This parameter sets the correction time for the

downstream interleaved buffer. RS can also

be disabled.

Annex Type This parameter is set as per Annex

compliance of the code release.

GlobespanVirata High Speed ADSL DMT

(ADSL+) applications only.

6.7.1.2 Alarm Profile Configuration

If to configure Alarm Profile, proceed as follows.

1. Double Click on “Alarm Profile Configuration” from the Function List Window.

The Alarm Profile Configuration window appears.

2. To creat a new alarm profile, click the DSL Name drop-down list and then

select the blank.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 602 603

Comentários a estes Manuais

Sem comentários

APC IP DSLAM Guia do Utilizador Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Redes APC IP DSLAM