APC IP DSLAM Guia do Utilizador descarregar pdf (Página 27)

100

101

ADSL2/2+ IP DSLAM

4.4 Ways of Management Connection

This section will tell you how to connect and manage your ADSL2/2+ IP

DSLAM through CLI and EMS.

4.4.1 EMS(Element Management System)

The Element Management System (EMS) is more user- friendly than CLI for

your configuring ADSL2/2+ IP DSLAM. The HTML files embedded in

ADSL2/2+ IP DSLAM are dynamically linked to the system’s functional

command sets. You can access a specified ADSL2/2+ IP DSLAM through

EMS.

Perform initial configuration procedures as follows:

1. Click the EMS icon on the screen of autorun to install EMS into your PC.

2. Before you start to connect to EMS, it is necessary that your PC’s IP and

ADSL2/2+ IP DSLAM’s IP are in the same group. Note: ADSL2/2+ IP

DSLAM’s default Uplink IP is 192.168.100.111

3. Create management IPs into the ADSL2/2+ IP DSLAM so that the

authorized IP agent can manage ADSL2/2+ IP DSLAM through EMS.

Connect to ADSL2/2+ IP DSLAM with RS-232 or Ethernet cable, and

then write the IPs into ADSL2/2+ IP DSLAM by telnet or CLI. Input the

following commands sequentially:

a. create snmp comm community public

b. create snmp host IP 192.168.100. xxx community public, where

192.168.100.xxx is the IP of your PC.

c. create snmp traphost ip 192.168.100.xxx community public version v1,

where 192.168.100.xxx is the IP of your PC.

Note: if to use CLI, bits per second, data bits, parity, and flow control should

be set as 9600, 8, none and 1 respectively.

4. Launch the EMS and then log in with the “Admin” for both user name

and password. Click on

to enter the EMS system. Log in as usual.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 602 603

Comentários a estes Manuais

Sem comentários

APC IP DSLAM Guia do Utilizador Página 27

Comentários a estes Manuais

Manuais e produtos relacionados com Redes APC IP DSLAM